Introduction Of Aluminium Foil
.jpg)
Introduction Of Aluminium Foil
| No. | Denomination | Final Application | Alloy Temper |
Thickness | Width | Inner Dia. | Outer Dia. |
| 1 | Household Aluminium Foil | Soft Packing In Household | 8011 O |
0.009-0.02 | 200-1000 | 76 152 |
500-800 |
| 2 | Cable Aluminium Foil | Wrap For Cable | 8011, 1100 O |
0.10-0.20 | 400, 450, 500 |
76 152 |
700-800 |
| 3 | Pharmaceutical Aluminium Foil | Packing For Pharmaecutical | 8011, H18 |
0.018-0.030 | 400-600 | 152 | 700-800 |
| 4 | Aluminium Fin Stock | Heat Exchanger And Condensator For A/C | 8011 O/H24 |
0.1-0.15 | 400-1000 | 152 | 700-800 |
| 5 | Cigarette Aluminium Foil | Packing For Cigarette | 1235 O |
0.0065-0.007 | 400-600 | 76 | 400-500 |
| 6 | Thin Aluminium Foil For Deep Processing | Aluminium Foil With Double Zero Applied In Surface Of Packing Material | 1235/8011 O |
0.0065-0.007 | 400-1000 | 76 | 400-500 |
| 7 | Thick Aluminium Foil For Deep Processing | Seal For Beer Bottle | 8011 O |
0.01-0.013 | 300-600 | 76 152 |
400-800 |
| Aluminium Adhesive Tape | 0.02-0.06 | 300-600 | 76 152 |
400-800 | |||
| 8 | Container Aluminium Foil | Food Container Applied In Ailines | 3003/8011 O/H24 |
0.06-0.10 | 300-900 | 76 152 |
400-800 |
| 9 | Aluminium Foil For Automobile Radiator | Water Tank Radiator In Automobile | 8011 H18 |
0.08-0.10 | 140-600 | 76 | 500-800 |
| 10 | Aluminium Foil For Hot Seal | Hot Seal Cover For Acidophilus Milk And Other Beverage | 8011 O |
0.02-0.04 | 300-600 | 76 | 500-800 |
Hydrophilic Aluminium Fin Stock
Hydrophilic Aluminium Fin Stock Is Widely Used In Household Air Conditioner, Refrigerator, Colding Equipment And Vehicle Air Conditioner, Automobile Water Tanks, Etc. Our Company Produce Air Conditioner Foil Material Performance Indicators To Achieve A Total Domestic And International Leading Level, Products Are Exported To All Over The World.
Technology Standard For Hydrophilic Aluminium Fin Stock
| Product | Alloy | Temper | Thickness | Width | Inner Dia. | Remark |
| Hydrophilic Aluminium Fin Stock |
1100 1200 801 | O, H22, H24 | 0.08-0.20 | 100-1200 | 76,152 300,500 |
Technology Standard For Hydrophilic Aluminium Fin Stock
Alloy |
Temper | Mechanical Performance Under Room Temperature | ||
| Tensile (Mpa) | Elongation (e%) | Erichson (IE, mm) | ||
| 1100 1200 8011 |
O | 80-110 | ≥20 | ≥6.0 |
| H22 | 100-135 | ≥16 | ≥5.5 | |
| H24 | 115-145 | ≥12 | ≥5.0 | |
| H26 | 125-160 | ≥8 | ≥4.0 | |
| H18 | ≥160 | ≥1 | - | |
| Thickness And Tolerance | Width And Tolerance | Inner Diameter | Max OD For Finish Products | Core Material |
| 0.08-0.20 (+/-0.005) | 100-1000 (+/-0.5) | 76, 152, 200, 505 | ≤1100 | Aluminium, Steel |
| No. | Item Index | Technique Index | |
| 1 | Film Thickness | 1.0-2.0um (Single Side Average Thickness) | |
| 2 | Hydrophile |
Primary Contact Angle | Primary Contact Angle ≤10° |
| Continuous Contact | Continuous Contact Angle ≤20° | ||
| 3 | Adherence | Erichson Test (Press Deeply To 5mm): No Peeling Grinding Test (100/100): No Plunger Separation |
|
| 4 | Corrosion Resistance | R.N≥9.5 Salt Spray Test (72 hours) | |
| 5 | Alkali Resustance | Dipped In 20% NaOH in 20℃ For 3 Minutes, Absolutely No Blister | |
| 6 | Impregnant Resistance | Sample Weight loss 1% | |
| 7 | Heat Resistance | Under 200℃, For 5 Minutes, Performance And Colour Unchanged Under 300℃, For 5 Minutes, The Coating Film Becomes A Little Yellow |
|
| 8 | Oil Proof | Dip In Volatile Oil 24 Hours, No Blisters On The Coating Film | |
| 9 | Odor Of The Coating Film | No Odor | |
| 10 | Abrasion To Mould | Same As Ordinary Aluminium Foil | |
Coated Aluminium Foil( Aluminium Coi, Aluminium Sheet), Lacquered Aluminium Strip For Manufacture Pharma Vial Seals And Wine Cap, Beverage Caps, etc.
| Alloy | 8011, 3105 |
| Temper | H14 & H16 |
| Thickness | 0.17-0.24mm |
| Width | 50-900mm |
| Length | 500mm-1000mm |
| Earring | 2% Max |
| Inner Dia. | 76mm and 152mm |
| Tensile Strenght | 135-155Mpa |
| longation | 2.5%-3.5% |
Surface Treatment |
1. One side isgolden/white/blue/red or other colored and other sides are clear lacquer |
| 2. Both sides are clear lacquer | |
| Test Item | Autoclave resistance , aceton test. Hgcl2 . Rigid test etc |
| Application | Pharmaceutical caps . PP caps, Vial seals, Bottle caps,Wine cap etc |
| MOQ | 3-5ton per size |
| Packaging | Wooden stronger boxes |
| Shipment | 25-30days after order and deposit |